[Elecraft] KX2: Is it possible to clear the clock with a command on the interface?

[Nr4c]

Do you have the clock installed?  

Sent from my iPhone
...nr4c. bill


> On Apr 8, 2020, at 8:23 PM, Ron Rossi <kk1l at comcast.net> wrote:
> 
> I just noticed that. It is greyed out for me. No option to click it.
> 
> 73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
> QTH: Jericho, Vermont
> My page: http://kk1l.com
> 
>> On 4/8/2020 20:00, Grant Youngman wrote:
>> It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
>> 
>> Grant NQ5T
>> 
>>>> On Apr 8, 2020, at 7:56 PM, Ron Rossi <kk1l at comcast.net> wrote:
>>> 
>>> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
>>> 
>>> 73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
>>> QTH: Jericho, Vermont
>>> My page: http://kk1l.com
>>> 
>>> On 4/8/2020 19:45, Grant Youngman wrote:
>>>> You can set the tine from the KX2 utility ….
>>>> 
>>>>> On Apr 8, 2020, at 7:41 PM, KK1L <kk1l at comcast.net> wrote:
>>>>> 
>>>>> Folks,
>>>>> 
>>>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>>>> I am considering using a macros to set the time, but the menu only allows
>>>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>>>> clear the clock to zero I could also set the time. I have looked through the
>>>>> command set pretty well and think the answer is "no", but figured I would
>>>>> ask.
>>>>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com