[Elecraft] TX Calibration fails on 30m only

[Bill Steffey NY9H]

thought it good day to do a tx calibration.

I don't very often use 30 meters..    and today the calib quits at 30 
meters saying  too high for calibration   4.1 swr...

All other bands indicate swr of 1.1 //  except 10mHz...


I looked and the 10mHz low pass filter is shared with 14mHZ... and 20 
looks ok. Don't know if the problem is in the tuner while in "BYPASS " 
for the test, or elsewhere.   Any help ???  searching found nothing for me.


bill



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus