[Elecraft] KPA100 and Audio Issue

[Ed Pflueger]

That's where the problem was in my 2 K3S's.

Ed.. AB4IQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, April 6, 2020 1:09 PM
To: Rich <rwnewbould at comcast.net>; Elecraft <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KPA100 and Audio Issue

Rich,

Well, since the KPA100 is an option for the K2 (and not for any other transceiver), I did not make a typo.
Since you have the K3S, the 100 watt amplifier is the KPA3.
That is why one has to be careful when specifying designations of options.

As I recall, that distorted audio on the K3S is a symptom of a failure in the LPA on the RF Board.  Contact support at elecraft.com to get some points to check.

73,
Don W3FPR

On 4/6/2020 1:43 PM, Rich wrote:
> Just to make sure that was a typo you said K2??
>
> I did your test on my K3S and I am getting about 55 watts on the meter
>
> Any other ideas?
>
> Thank you so much
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to ab4iq at comcast.net