[Elecraft] K3 Settings for SignaLink USB

[JP Douglas]

You have the Signalink w/the module or the one w/jumpers? Several of my friends have had trouble w/the Signalink w/the module, I have two Signalinks, both w/jumpers and don’t have any issues.
73 de Jose Douglas KB1TCD


Sent from my iPad

> On Apr 4, 2020, at 4:21 AM, David Bondy <david at g4nrt.com> wrote:
> 
> I have been using digital modes for years and have a number of SignaLink USB devices which have all worked very well with a variety of rigs. 
> 
> I am new to the K3 and have bought the Tigertronics cable and module set to allow me to connect a SignaLink USB to the rear Line In/Out and PTT connections on my K3.
> 
> I am able to operate the rig (via a USB to RS232 cable for CAT) and transmit JT8 signals (via the SignaLink) - I can see that I am getting out by monitoring Hamspots!  HOWEVER I am not able to get enough drive from the K3 via the Signalink USB to decode incoming signals.
> 
> Can someone who has this working please tell me what settings they have made to the K3 in order to drive the SignaLink? I have set CONFIG > LIN OUT  to 100 and I have rotated the Rx knob to full clockwise on the SignaLink but I am still not getting enough output to drive WSJT-X.  I am sure that I am missing something but I don’t know what because I would expect the LIN OUT setting to be more like 10!
> 
> Thanks in advance and 73,
> 
> David G4NRT
> 
> P.S. Please don’t bother to reply telling me to connect the rig to my PC sound card … it doesn’t have one!
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kb1tcd at gmail.com