[Elecraft] Audio Hum in TX Data Mode

[Nr4c]

Their isolators built in the K3 on the LineIn/LineOut lines. 

And there is no “tx DATA” mode. The “tx” is indicates which VFO is used for transmit with an arrow above (A) or below (B). 

Sent from my iPhone
...nr4c. bill


> On Sep 27, 2019, at 8:25 PM, Jim Miller <jtmiller47 at gmail.com> wrote:
> 
> Do you hear the human SSB also?
> 
> 
>> On Sep 27, 2019, at 8:20 PM, Bill Johnson <k9yeq at live.com> wrote:
>> 
> 
> You can buy an audio isolator cable on line to remove the ground loop issues.  Just search the topic for devices.  I believe I used Amazon.
> 
> Bill
> 920-421-1172
> 
> ________________________________
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Conrad PA5Y <g0ruz at g0ruz.com>
> Sent: Friday, September 27, 2019 4:26:55 PM
> To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
> Subject: [Elecraft] Audio Hum in TX Data Mode
> 
> I put up a new 6m antenna mainly for EME and I was so looking forward to using my K3S. The RX is great, I run it in parallel with 2 other receivers and it works very well on EME. However try as I might I cannot get rid of some quite bad hum on the TX Audio. I am using USB and before you ask yes I have got a low impedance ground from the PC to the K3S although removing it makes absolutely no difference.  What did make a difference was moving the radio away from sources of magnetic fields such as monitors. However I cannot get rid of it completely. It also increases or at least changes when I put my hands on the radio.
> 
> I have a few other radios located nearby and close to a monitor, pc or PSU and they do not suffer from this at all. Is this a common problem, is it a bad ground in the audio path internally or magnetic coupling into an audio transformer?
> 
> It is completely impractical for me to move my radios 10 feet from any magnetic fields. Short of wrapping the radio in mu metal I really do not seem to be able to fix this.
> 
> Any ideas? I have read and understood and followed Jim K9YC's advice and this works perfectly for my other 3 radios. I am really at a loss.
> 
> 73
> 
> Conrad PA5Y
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9yeq at live.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at jtmiller.com 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com