[Elecraft] K3 Accessory Y Cable?

[Jim Rhodes]

The Cable Wholesale item and possibly the others will work fine as long as
you do not need band data. At least the Cable Warehouse special sheet shows
pin9 as not connected. Best bet if you need this is a y-box, or do like I
did years ago and build your own. Used a utility box, punched some DB9
holes in it and used a breadboard type PC board to connect 1 female and 3
female connectors in parallel. Other connections for fsk and such added as
needed.


On Sunday, September 22, 2019, Joe Subich, W4TV <lists at subich.com> wrote:
>
> Both Cable Wholesale ($3.72) and Altex ($7.99) are substantially
> less expensive than Winford ($17.30) and Array Solutions ($15.00).
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2019-09-22 10:36 PM, Hank Garretson wrote:
>>
>> I'm on the road right now so may not have this exactly right, but check
>>
>> https://www.cablewholesale.com/
>>
>> Much cheaper.
>>
>> 73,
>>
>> Hank, W6SX
>>
>> On Sun, Sep 22, 2019, 7:22 PM Gary Johnson <gwj at wb9jps.com> wrote:
>>
>>> Winford Engineering  https://www.winford.com/products/cdy15hd.php <
>>> https://www.winford.com/products/cdy15hd.php>
>>>
>>> Array Solutions https://www.arraysolutions.com/k3-y <
>>> https://www.arraysolutions.com/k3-y>
>>>
>>> -Gary NA6O
>>>
>>>
>>>> I believe that Elecraft used to sell a Y cable for connecting from the
>>>> accessory socket on the K3 to both the KPA1500 and a RemoteRig radio
side
>>>> box.
>>>>
>>>> I no longer see this on the Elecraft site.
>>>>
>>>> Anybody have a source for these?
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com