[Elecraft] K4 Capabilities on 630 Meters?
Wayne Burdick
n6kr at elecraft.com
Sat Sep 21 17:22:22 EDT 2019
It can do either. You can route the low-power TX signal to either an external jack or an internal transverter.
Similarly, there are both internal and external transverter receive connections.
Wayne
----
elecraft.com
> On Sep 21, 2019, at 12:09 PM, donovanf at starpower.net wrote:
>
> Hi Wayne,
>
> Your email implies that the K4 no longer has the capability to transmit
> a few dBm on 630 meters to drive an external 630 meter amplifier.
>
> Does the K4 now require an external transverter, unlike the K3 that
> provides a few dBm of 630 meter TX output?
>
> tks
>
> 73
> Frank
> W3LPL
>
>
>
>
>
> > -------- Forwarded Message --------
> > Subject: Re: [Elecraft] K4 Question
> > Date: Thu, 19 Sep 2019 12:17:54 -0700
> > From: Wayne Burdick <n6kr at elecraft.com>
> > To: Elecraft Reflector <elecraft at mailman.qth.net>
> >
> > Joel,
> >
> > The K4 will receive on all LF and MF bands down to 100 kHz. In TX mode, it can put out a few dBm at the XVTR OUT jack for use with external low-band transverters.
> >
> > Since the K4 also has provisions for an *internal* transverter, we could in theory offer one in for these bands. Power output could be as much as 10 or 15 W. This is all speculative, though, as the plan has been to cover one or two VHF/UHF bands with the internal transverter module.
> >
> > 73,
> > Wayne
> > N6KR
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donovanf at starpower.net
>
More information about the Elecraft
mailing list