[Elecraft] K4 Features and current K3+
RALPH TURK
w7hsg at comcast.net
Fri Sep 20 08:20:59 EDT 2019
A feature that should be included in the "K4" is a software addition that will allow one to
send digital via the rear audio in connector while operating USB (upper sideband) with the
front mike. I use the current K3+ on AirForce/Army Mars. I need to be able to switch from
digital (M110A) to voice on a moments notice so can not use the digital modes. The mike is
hot while transmitting digital. Most mikes leave the mike element hot. The PTT is a SPST
switch. This means that you have to be careful not to have any noise in the shack while transmitting
digital. If there is a way on the K3, service was not able to point it out.
Ralph, W7HSG/AFA9RT
> On September 19, 2019 at 8:51 PM Wayne Burdick <n6kr at elecraft.com> wrote:
>
>
> Just in case there's any doubt, the K4 has a complete, multiplatform-compatible sound card interface via its USB-B connector, with two virtual control ports and stereo digital audio. That's in addition to three USB-A ports, true RS232 via DE9 for legacy station interfaces, full analog audio I/O, HDMI, and the usual ACC jack. It's a superset of the KIO3B.
>
> 73,
> Wayne
> N6KR
>
>
> > On Sep 19, 2019, at 7:16 PM, Eric Garner <garnere at gmail.com> wrote:
> >
> > One thing it buys you is compatibility with user expectations. The K3s has
> > a builtin USB sound card, so leaving it out of the K4 would not meet user
> > expectations of what flagship rig like the K4 should look like. Considering
> > there's a USB sound card built into most modern rigs now, it would look bad
> > when comparing them.
> >
> > I can even hear the whining and moaning now "You are telling me that the
> > IC-7300, which costs less than a quarter of the price of the K4 has a
> > built-in sound card and the K4 does not?"
> >
> > -Eric
> >
> > On Tue, Aug 20, 2019 at 11:48 AM David Gilbert <xdavid at cis-broadband.com>
> > wrote:
> >
> >>
> >> What does the built in sound card buy you? You don't save on cabling
> >> and USB sound card dongles for the computer are small, cheap, and work
> >> fine for digital modes.
> >>
> >> 73,
> >> Dave AB7E
> >>
> >>
> >>
> >> On 8/20/2019 11:15 AM, Carl Jón Denbow wrote:
> >>> I would like to see a built-in sound card for digital modes. As far as
> >> I know there is no small, portable rig that has this feature. I do expect
> >> that a KX4 is either on the drawing boards or at least has been discussed
> >> by the Elecraft brain trust (aka Eric & Wayne). 73 de Carl
> >>>
> >>> Sent from my iPhone
> >>> ===========================
> >>> Carl Jón Denbow, N8VZ
> >>> 17 Coventry Lane
> >>> Athens, Ohio 45701-3718
> >>>
> >>> carl at n8vz.com
> >>> www.n8vz.com
> >>> EM89wh
> >>>
> >>> IRLP 4533 Echolink 116070
> >>>
> >>> PSK and JT65 Forever!
> >>> ===========================
> >>>
> >>>> On Aug 20, 2019, at 1:48 PM, Tox <scott.small at gmail.com> wrote:
> >>>>
> >>>> Yep. If you were looking for a sequel to the KX3, the answer appears
> >>>> to have been:
> >>>> smaller
> >>>> lighter
> >>>> capable of usage in an HT manner
> >>>> lithium batteries
> >>>> ...and delivered as the KX2 :)
> >>>>
> >>>>> On Tue, Aug 20, 2019 at 10:18 AM Nr4c <nr4c at widomaker.com> wrote:
> >>>>>
> >>>>> I think you’re going to have to wait a bit for this one. The KX2 kinda
> >> slipped in there with a lot of bang fit the buck. And in a real small
> >> package.
> >>>>>
> >>>>> Sent from my iPhone
> >>>>> ...nr4c. bill
> >>>>>
> >>>>>
> >>>>>> On Aug 20, 2019, at 12:55 PM, Doug Hensley <w5jv at hotmail.com> wrote:
> >>>>>>
> >>>>>> With the KX3 now aging from its 2012 debut, has anyone heard what
> >> might be on the
> >>>>>> planning board for a KX4 ? Inquiring minds . . . . .
> >>>>>>
> >>>>>> If you are a KX3 user, what would you like to see?
> >>>>>>
> >>>>>> Cheers,
> >>>>>>
> >>>>>> Doug W5JV
> >>>>>> K1, K2, K3s
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.
> >> Looking for something special? Ask us.
> >>>>>> Wanted: Petersen Type PR-1 in FT-243 holder cut for 1770 kHZ (Used in
> >> IF Stage of a Mackay Receiver).
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> ______________________________________________________________
> >>>>>> Elecraft mailing list
> >>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>>> Post: mailto:Elecraft at mailman.qth.net
> >>>>>>
> >>>>>> This list hosted by: http://www.qsl.net
> >>>>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>>>> Message delivered to nr4c at widomaker.com
> >>>>> ______________________________________________________________
> >>>>> Elecraft mailing list
> >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>> Post: mailto:Elecraft at mailman.qth.net
> >>>>>
> >>>>> This list hosted by: http://www.qsl.net
> >>>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>>> Message delivered to scott.small at gmail.com
> >>>>
> >>>>
> >>>> --
> >>>> Scott Small
> >>>> ______________________________________________________________
> >>>> Elecraft mailing list
> >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>> Post: mailto:Elecraft at mailman.qth.net
> >>>>
> >>>> This list hosted by: http://www.qsl.net
> >>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>> Message delivered to n8vz at qth.com
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to xdavid at cis-broadband.com
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to garnere at gmail.com
> >
> >
> >
> > --
> > --Eric
> > _________________________________________
> > Eric Garner
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n6kr at elecraft.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7hsg at comcast.net
More information about the Elecraft
mailing list