[Elecraft] Width adjustment of Manual Notch Filter on K3S

[Nr4c]

Could you switch to “other” time slot so you don’t TX at same time?

Sent from my iPhone
...nr4c. bill


> On Sep 11, 2019, at 5:02 PM, Ken Bandy, KJ9B <ken.kj9b at gmail.com> wrote:
> 
> Hello.  Is it possible to manually adjust anything other than the position
> of the notch filter on the K3S.  I recently was working FT8, when a ham
> relatively close to me was desensing my receiver when working FT8 on the
> same band.  I was able to notch him out by manually setting the filter, but
> it seems like a pretty wide notch, especially for FT8, and was wondering if
> it was possible to adjust the width of the notch.  I didn't see anything in
> the manual regarding adjustment of the width.
> 
> 
> 
> Thanks and 73,
> 
> Ken, KJ9B
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com