[Elecraft] K3 - Selecting a freq memory slot via a CAT command

[Fred Jensen]

Thanks for the replies.  Can't explain how I missed MCnnn;, I made 3 
passes thru the table.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 8/30/2019 5:50 PM, Grant Youngman wrote:
> Look at the MCnnn; command, p15 of the Programmer’s Reference.
>
> Sent from my iPhone
>
>> On Aug 30, 2019, at 7:00 PM, Fred Jensen <k6dgw at foothill.net> wrote:
>>
>> I've gone through the K3 command list several times and I can't find a command that allows me to select a specific frequency memory channel from a macro.  I've been making a few CW QSO's on 60 m, I have an empty slot on my KPOD, and I'd like to:
>>
>> M>V
>> Select slot
>> M>V
>>
>> My 60 meter slots are set up for channel hopping thru the 5 "channels" with VFO A set to center of channel [CW, PSK] and VFO B set to the suppressed carrier frequency for USB.
>>
>> 73,
>> Fred ["Skip"] K6DGW
>> Sparks NV DM09dn
>> Washoe County
>>