[Elecraft] Question on frequency when in fine/medium/coarse

[Don Wilhelm]

Bob,

An alternative solution is to set VFO CRS to what you want (it is per 
mode).  Also set VFO OFS to ON.

Now you can use the RIT/XIT knob for coarse excursions across the band 
while leaving VFO A set to FINE.  Of course, if you turn RIT/XIT on, you 
will lose that capability until you turn it off.

73,
Don W3FPR

On 10/17/2019 9:48 AM, Bob Novas via Elecraft wrote:
> Bill - hunh.  I didn’t think of testing it that way, but clearly that works and tells the tale.  Kind of off-putting, knowing that you’re really up to 99 Hz away from where you think you are when you select Coarse.  Maybe a good use for a macro.
>