[Elecraft] Question on frequency when in fine/medium/coarse

[Bill Weaver]

Bob,
 

 
I just tested it. It looks like the undisplayed digits are retained. My example 7.02647. Select coarse 7.02644 tune around and return to 7.0264 and select medium returns to 7.02647.
 

 
73,
 

 
Bill WE5P
 
 
 

 
 
 
 
 
>  
> On Oct 17, 2019 at 08:23, Bob Novas via Elecraft  <elecraft at mailman.qth.net>  wrote:
>  
>  
>  When the K3s is in Coarse tuning mode, showing 100 Hz steps, are the 10 Hz and 1 Hz settings retained from wherever they were, or are they jammed to 0's? In other words, if the dial reads 7010.1, is the K3s running on the frequency 7010.100 or possibly 7010.1?? where the ?? are whatever happened to be dialed in before going to Coarse tuning? Thanks, Bob Novas - W3DK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to weaverwf at usermail.com 
>