[Elecraft] KPA500 with K3s

[Dick Dievendorff]

See pages 15, 16, and 27 of the KPA500 Owner's manual for a description of
what the 15-pin ACC cable can do for you.

It amounts to band information both ways so the amp can switch bands from
the K3's band information before you provide RF, the KPA500 front panel band
buttons can bandswitch the K3, and K3 drive power can be set to two
different levels based on the amp's OPER/STBY switch. My K3 provides 30
watts when the amp is in OPER, and 100 watts when the amp is in STBY.

73 de Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Dave Sublette
Sent: Thursday, October 10, 2019 04:15
To: Elecraft Discussion List <elecraft at mailman.qth.net>
Subject: [Elecraft] KPA500 with K3s

Good morning,

I am building the KPA500.  I have the K3s.  Can anyone explain, in simple
terms, what advantage there is in using the KPAK3AUX cable instead of just
using the Key Line cable?

Thanks,

Dave, K4TO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com