[Elecraft] K3 CW Text Decoding

[Barry]

Brian,
     It does work. But it usually takes a pretty good signal. I have gone 
over to CW Skimmer as it appears to be t he best thing on the street, 
better than most all of the others. I can contest with it at a pretty 
good clip. The setup is slightly involved, but once set up it really 
works well and can control the radio.

73,
Barry
K3NDM

------ Original Message ------
From: "B Deuby" <bdeuby at gmail.com>
To: elecraft at mailman.qth.net
Sent: 10/7/2019 8:11:24 PM
Subject: [Elecraft] K3 CW Text Decoding

>I am unable to get the Text Decode function on my K3 to produce accurate results. I have employed the tweaks suggested in the K3 manual, but the text produced bears little resemblance to the code that was sent.
>
>Ordinarily I would ascribe a problem like this to operator error - but I don’t think that this is the case.
>
>Any suggestions and/or observations would be appreciated.
>
>Thanks,
>
>Brian, K8GRR
>
>Sent from my iPhone
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to barrylazar2 at gmail.com