[Elecraft] K3S WSJT and FT8

[markmusick at sbcglobal.net]

Hi Wes,
I worked 3B8M on 11-24-19 at 1721 on 14.096 MHz using my K2/10 running 5 Watts. 
>From my QTH here near Indianapolis that is a 9,900+ mile path.

Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Wes
Sent: Wednesday, November 27, 2019 12:41
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3S WSJT and FT8

Nothing to do with your problem but I had to say that I copied, and called unsuccessfully, 3B8M on 40-meter CW on 11-24-19 @ 1651Z, which is 0951 AM local time here in Arizona.  This is 3 hours past my SR on a >11,000 mile path.  Who needs FT8?

I'll look for you on 80 and 160.

Wes  N7WS


On 11/26/2019 11:28 PM, Olof Lundberg wrote:
> Thank you all. I thought I had all this done but the obfuscated Windows 10 audio settings caught me out probably. It turned out that it was the transmit chain of audio level settings wsjt pwr - windows spkr audio - K3 mic/line level that had to be ’tuned’. So next step will be to read up on how you do the qsos. 3B8M might do a test run on 17m later today and I will try to do 160 and perhaps 80 around sunset/sunrise night between Wed and Thu my time. That would be 1830 and 0120 UTC respectively.
>
> 73 and, again, many thanks for the quick help
>
> Olof G0CKV
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmusick at sbcglobal.net