[Elecraft] KAT-500 problem

[Rick Bates, NK7I]

Check ALL your coax connections (and quality of coax), making SURE that 
the connectors are properly attached (soldered or crimped) to the wires 
AND that they are securely attached to the mated connector on the KAT500.

A /little/ leakage is normal but unless that station is 40 over 9, you 
shouldn't hear it.

My first guess would be that something failed or came loose.

Rick NK7I


On 11/23/2019 1:20 PM, Jack W4GRJ wrote:
> Sounds like you have a great receiver
> Jack
> W4GRJ
>
>> On Nov 23, 2019, at 4:14 PM, jdfreed at bellsouth.net wrote:
>>
> I have a KAT-500 at least 4 years old.  I can hear stations without any
> antennas connected to it.  I live in Clarksville, TN and I copied  station
> in Bradenton, FL 600+ miles away on 14.3 MHZ.  I have had the same thing
> happen on 40 meters as well.  Any ideas???
>
>
>
> KX6F
>
> John Freed
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w4grj at satterfield.org
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com