[Elecraft] K3 Front Panel Flash.

[donovanf at starpower.net]

Hi Tony, 


I had the same problem a few years ago. It turned out to be the the "gold pins" 
problem on the front panel PC board. Removing and reinserting the 
connectors temporarily fixed the problem, but it soon returned until 
gold pins were installed. 


73 
Frank 
W3LPL 

----- Original Message -----

From: "Tony Canning" <g0opb at compuserve.com> 
To: elecraft at mailman.qth.net 
Sent: Thursday, November 21, 2019 5:35:15 PM 
Subject: [Elecraft] K3 Front Panel Flash. 

Having some issues making the utility prog fill the FP flash, both MCU and DSP are OK.Tried two FTDI serial leads with same result.K3 Display = "FP Pending"Also PC utility displays error #000000048Any sugestions welcome. 
Thanks 
Tony G2NF 
g0opb at compuserve.com 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donovanf at starpower.net