[Elecraft] K3 push buttons no longer workin

[Rick Bates, NK7I]

You might be able to use a radio control program (HRD being one) since 
the controls simply tell the CPU what to do.  Not ideal but you'd be on 
the air again while researching a proper fix.

73
Rick NK7I


On 11/18/2019 11:46 AM, Mpridesti via Elecraft wrote:
> Hate to have to send it back to the factory at this time of the year. Is there a work around?
>
> Regards,
>
> Mark, K1RX
>
>
>> On Nov 18, 2019, at 1:15 PM, Christian Friess <dl2mdu at darc.de> wrote:
>>
>> In my case the 4 rotary encoders had to be replaced.
>>
>> 73 de Chris, DL2MDU
>>
>>> Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft:
>>> Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW.
>>>
>>> Did a firmware reload (newest from web) and no change.
>>>
>>> What’s the fix?
>>>
>>> Regards,
>>>
>>> Mark, K1RX
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to dl2mdu at darc.de
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mpridesti at yahoo.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com