[Elecraft] Here is an odd one...

[Don Wilhelm]

Dave,

Yes, those locking screws should always be screwed in.  Things may work 
without it in a temporary setting (for a quick test for instance), but 
for a permanent station setup, screw in those jackscrews.  If the 
equipment is moved or there is anything that might "tug" on the cable or 
vibrate it, the jackscrews will keep it from being disconnected.

73,
Don W3FPR


On 11/17/2019 6:35 PM, Dave Cole wrote:

>> 
> Some troubleshooting later, I find the data cable plugged into the AUX 
> connector of the K3 has dropped out...  Go figure, no one was even home...
> 
> Last time I fail to screw in the locking pins...
>