[Elecraft] K3 - WSJT-X help

[tony.kaz at verizon.net]

Hi Pete,
Maybe it is just magic?
73,
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of N4ZR
Sent: Wednesday, November 13, 2019 9:23 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 - WSJT-X help

I run into this over and over with Windows 10, and I'm embarrassed to say I often don't know what makes the difference.  I use the microphone input and speakers output on an outboard USB sound card, and generally find myself just dinking around with the various sound settings until I find something that causes it to start working.  My suspicion is that Windows 10 update has a nasty habit of resetting audio arrangements to some arbitrary set of "defaults."

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 11/13/2019 8:10 AM, N2TK via Elecraft wrote:
> Don,
> Tnx for the reminder on checking the audio on the ALC meter. It was so long since I had a problem I forgot about doing that. There was no audio shown on the K3. What happened is that in WSJT-X > Settings > Audio > Soundcard, The OUTPUT was no longer Speakers (USB Audio CODEC). Somehow it changed to SPEAKERS (Realtek High Definition Audio), which is my audio for my pc. Changed it to what it was supposed to be and now I am fine. I have no idea what changed the setting as I was working station after station when this happened.
> Weird.
>
> 73,
> N2TK, Tony
>
> -----Original Message-----
> From: Don Wilhelm <donwilh at embarqmail.com>
> Sent: Wednesday, November 13, 2019 7:40 AM
> To: tony.kaz at verizon.net; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 - WSJT-X help
>
> Tony,
>
> Soundcard problem or K3 problem.  This is most commonly a problem with audio into the K3.
>
> How many bars illuminate on the ALC meter?  It should be 4 with the 5th bar flashing.  If not, look at the audio levels.
>
> See the article on my website www.w3fpr.com
>
> 73,
> Don W3FPR
>
> On 11/13/2019 7:04 AM, N2TK via Elecraft wrote:
>> Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X,
>> v2.0.1 when I no longer would get power out.
>>
>> WSJT is keying the K3 (Red transmit light is on) but no power out. 
>> The
>> K3 keys fine with power out in CW or other modes is fine. WSJT is 
>> talking to the K3. WSJT shows the correct frequency, it is decoding 
>> and when I go into Settings > Radio and hit Test CAT it goes green.
>> When I hit TUNE on WSJT it turns to red and the red TX light on the K3 comes on. But no power out.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> n4zr at comcast.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to tony.kaz at verizon.net