[Elecraft] K3 - WSJT-X help

[Don Wilhelm]

Tony,

Soundcard problem or K3 problem.  This is most commonly a problem with 
audio into the K3.

How many bars illuminate on the ALC meter?  It should be 4 with the 5th 
bar flashing.  If not, look at the audio levels.

See the article on my website www.w3fpr.com

73,
Don W3FPR

On 11/13/2019 7:04 AM, N2TK via Elecraft wrote:
> Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X, v2.0.1
> when I no longer would get power out.
> 
> WSJT is keying the K3 (Red transmit light is on) but no power out. The K3
> keys fine with power out in CW or other modes is fine. WSJT is talking to
> the K3. WSJT shows the correct frequency, it is decoding and when I go into
> Settings > Radio and hit Test CAT it goes green. When I hit TUNE on WSJT it
> turns to red and the red TX light on the K3 comes on. But no power out.
>