[Elecraft] KAT500 remote

[Michael Walker]

Hi Hans

We need more information.

If you are using the remote client, there are a few things to set up.

First, the local software needs to be running on the PC that the AMP is
connected to

Have a look at the Port Number that the KPA500 software is listening on.
The default should work ok.

Now, run the same software on the remote PC and when you start it up, you
need specify the IP address and the port of the remote PC.  If you have a
VPN setup, that is great.  If not, then you need to do a port forward
through your router and you need to know the IP address of your Router.

This is pretty high level and I do not know your network expertise.    If
you understand all I wrote, then you will know what to do.

If not, then you will need a bunch more details from  us.

It does work as I have used it for years like that.

Mike va3mw


On Sat, Nov 9, 2019 at 3:57 AM Hans Johansson <sm6bga at gmail.com> wrote:

> I am trying to use KAT500 remote progrsm to control my KAT500 but
> I can't get any connection. If I use KAT500 utility it works quite OK and I
> get contact. Anyone who has an advice what I do wrong ?
>
> Hans  SM6BGA.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>