[Elecraft] K3 #2257 woke up deaf this morning ...

[Rick Bates, NK7I]

Also check your filter, NB and NR settings, sometimes they go wonky.

Rick NK7I

On 11/7/2019 8:26 AM, Bob McGraw K4TAX wrote:
> Check all connectors.  I've found that connectors that just "sit" and 
> are never moved will oxidize and prevent signal flow.   They rely on a 
> mechanical connection only.   Just unplug and re-plug 2 or three times 
> for each one.
>
> 73
>
> Bob, K4TAX
>
>
> On 11/7/2019 10:12 AM, Mike Flowers wrote:
>> Hi Folks,
>>
>>
>> I powered up my trust K3 #2257 this morning and found it deaf. The RF 
>> and
>> IF stages appear to be working just fine.  I have 20M FT8 showing 
>> lots of
>> signals on my P3, but no audio.
>>
>>
>> WSJT-X shows no audio from LINE OUT either.
>>
>>
>> I'm on the right antenna and haven't fiddled with parameters for 
>> months, so
>> I am wondering if there is anything I might try/check before taking 
>> it over
>> to Watsonville for repairs.
>>
>>
>> Thanks!
>>
>>
>> - 73 and good DX de Mike,  <http://www.qrz.com/db/k6mkf/> K6MKF, NCDXC
>> <https://www.ncdxc.org/>  Secretary
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com