[Elecraft] K3 #2257 woke up deaf this morning ...

[Bob McGraw K4TAX]

Check all connectors.  I've found that connectors that just "sit" and 
are never moved will oxidize and prevent signal flow.   They rely on a 
mechanical connection only.   Just unplug and re-plug 2 or three times 
for each one.

73

Bob, K4TAX


On 11/7/2019 10:12 AM, Mike Flowers wrote:
> Hi Folks,
>
>   
>
> I powered up my trust K3 #2257 this morning and found it deaf.   The RF and
> IF stages appear to be working just fine.  I have 20M FT8 showing lots of
> signals on my P3, but no audio.
>
>   
>
> WSJT-X shows no audio from LINE OUT either.
>
>   
>
> I'm on the right antenna and haven't fiddled with parameters for months, so
> I am wondering if there is anything I might try/check before taking it over
> to Watsonville for repairs.
>
>   
>
> Thanks!
>
>   
>
> - 73 and good DX de Mike,  <http://www.qrz.com/db/k6mkf/> K6MKF, NCDXC
> <https://www.ncdxc.org/>  Secretary
>
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>