[Elecraft] [Elecraft-K3] K3S to be discontinued

Joe Subich, W4TV lists at subich.com
Mon Nov 4 19:45:10 EST 2019


On 2019-11-04 6:20 PM, Wayne Burdick wrote:
> At home, use 13.8 to 14.2 V for lowest IMD. In the field, the K3 (and
> now, the K4) automatically scales maximum power output based on
> supply voltage, and can run down to as low as 11 V.

It is a shame that the maximum power output along with bias levels and
transformer ratios were not selected for lowest obtainable IMD.  Output
power (100 W) became the only specification that counted even though
60 W would have been enough to drive the KPA-500/KPA-1500 with truly
outstanding IMD.

73,

    ... Joe, W4TV


On 2019-11-04 6:20 PM, Wayne Burdick wrote:
> Hi all,
> 
> We've chosen to have the K4 continue to be a field-capable radio, inheriting the characteristics that have always made the K3/K3S (and the K2 before it) the preferred rig for FD, DXpeditions, and multi-transmitter stations. Thanks to a lightweight but rigid internal aluminum frame, the K4 weighs only slightly more than the K3/K3S, while integrating in a large LCD in a way that increases width by less than 3 inches. (Unlike on many rigs, our front panel includes separate optical encoders for VFO A, VFO B, and RIT/XIT.)
> 
> Current drain of the K4 is half that of most competing high-performance desktop radios, so it can be used with emergency power. At home, use 13.8 to 14.2 V for lowest IMD. In the field, the K3 (and now, the K4) automatically scales maximum power output based on supply voltage, and can run down to as low as 11 V.
> 
> 73,
> Wayne
> N6KR
> 
> 
>> On Nov 4, 2019, at 3:07 PM, Buck <radiok4ia at gmail.com> wrote:
>>
>> Perhaps the K4 should have been a 40V radio and the K3S remain as the 12V "portable" or "field" version.
>>
>> k4ia, Buck
>> K3# 101
>> Honor Roll  8B DXCC
>> EasyWayHamBooks.com
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
> 


More information about the Elecraft mailing list