[Elecraft] [Elecraft-K3] K3S to be discontinued

[Bob McGraw K4TAX]

Build radios with internal supplies capable of 90V to 250V and the PA's 
running 48 to 60 volts for 100 watt radios.   The continued insistence 
on 12V radios should be limited to mobile or portable type and 
configured radios.

73

Bob, K4TAX


On 11/4/2019 3:31 PM, Graydon (N7RXL) wrote:
> I'm grateful they do.  I always run the radio off of a battery, so I don't have to ever worry about whether the AC power is on or not.  I like to be able to run my radios during a disaster.  It's a lot simpler to connect the radio to the battery, than to connect radio to power supply, then to inverter, then to battery.
>
>
>> On Nov 4, 2019, at 12:53 PM, David Gilbert <xdavid at cis-broadband.com> wrote:
>>
>> ?
>> Their continued insistence upon everything being 12 volt capable is a bit of a puzzlement for me.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>