[Elecraft] [Elecraft-K3] K3S to be discontinued

Buck radiok4ia at gmail.com
Mon Nov 4 18:07:25 EST 2019


Perhaps the K4 should have been a 40V radio and the K3S remain as the 
12V "portable" or "field" version.

k4ia, Buck
K3# 101
Honor Roll  8B DXCC
EasyWayHamBooks.com

On 11/4/2019 5:02 PM, Joe Subich, W4TV wrote:
> On 2019-11-04 4:44 PM, Scott Manthe wrote:
>  > Elecraft's design philosophy dictates that their radio be capable of
>  > portable/field operation, so that's how they design their radios.
>  > They're lightweight, efficient, and operate off 12 volts.
> 
> If that's the design philosophy, limit the power output to 60 W PEP.
> 
> Elecraft already have *two* other 12V capable radios - the KX2 and KX3 -
> of one doesn't count the K2.  *WHY* create another dirty 12V radio
> ("active predistortion" is not the solution) when one can have a clean
> 60W radio at 12V or a clean 200W radio at 40V?
> 
> Build a DC-DC supply for the 40V PA stage if one wants to run it from
> an automobile electrical system (or install a separate 48V alternator,
> regulator and battery specifically for the PA stage).
> 
> Increasing transmit IMD by a factor of 40 just to operate the radio
> at 100 W PEP on a 12 battery is unconscionable given today's state
> of the art.  It was different when 48V transistors/FETs were not
> available but that ship sailed almost 20 years ago.
> 
> 73,
> 
>     ... Joe, W4TV
> 
> 
> On 2019-11-04 4:44 PM, Scott Manthe wrote:
>> Elecraft's design philosophy dictates that their radio be capable of 
>> portable/field operation, so that's how they design their radios. 
>> They're lightweight, efficient, and operate off 12 volts. Lots of 
>> other manufacturers love giant, heavy rigs. Elecraft doesn't.
>>
>> 73,
>> Scott N9AA
>>
>>
>> On 11/4/19 3:52 PM, David Gilbert wrote:
>>>
>>> I agree completely with all of that, but with the discontinuance of 
>>> the K3s it seems that Elecraft doesn't really consider the K4 to be 
>>> strictly a base station rig.  Their continued insistence upon 
>>> everything being 12 volt capable is a bit of a puzzlement for me.
>>>
>>> 73,
>>> Dave   AB7E
>>>
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to radiok4ia at gmail.com


More information about the Elecraft mailing list