[Elecraft] Connecting SDRPlay to P3 IF OUT, to CW Skimmer

[Bob McGraw K4TAX]

Why not take the RX OUT of the K3 to a BNC T  and the RX IN of the K3  
to the other side of the BNC T and with a BNC T  in that path, feed that 
to the SDR receiver.  Then on the K3 press the RX ANT button and both 
are fed the entire band from the same antenna and they are protected 
during transmit.   You can use HDSDR and OmniRig to control both the SDR 
receiver and control the K3.  With HDSDR and OmniRig it communicates 
both ways.

Two short BNC to BNC jumpers, a BNC T and a short BNC to the input on 
the SDR is all that is needed.

73

Bob, K4TAX