[Elecraft] Connecting SDRPlay to P3 IF OUT, to CW Skimmer

[Peter Dougherty]

I have the same front end protector on my K9AY receive loop, but that's not
a suitable antenna for anything above 80m, and I need the SDR to be
functional on all bands. I could put in an antenna switch, but honestly I'd
rather not unless there's no alternative. I only need the CW portion of the
currently active band to feed the SDR--but I agree, having full bandwidth
would be better.

I am also considering Win4K3 Suite, but I'm not sure about how to get this
to work with the K3s, DX Lab Suite, and N1MM+. It's a real nightmare to
understand if you don't really have much understanding of how it all works.

 - pjd

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Ignacy
Sent: Thursday, May 23, 2019 7:20 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Connecting SDRPlay to P3 IF OUT, to CW Skimmer

Connecting SDR may be simpler. I think HDSDR has an option to sent I/Q
signals to the Skimmer. I use AS-RXFEP - Receiver Front End Protector from
Array Solutions to protect SDR. I use TX vertical or RX loop as receive
antenna with AS-RXFEP - Receiver Front End Protector from Array Solutions,
close to TX antennas and never any problem. 

Igancy, NO9E 



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html