[Elecraft] K4 Remote Control

[Fred Jensen]

In WK host mode, you just send ASCII characters to the WK and it creates 
the Morse.  The only characters that will create Morse code are A-Z, 
0-9, and some punctuation ... that is only characters for which there is 
a Morse equivalent.  There are some host mode commands that will send a 
few prosigns such as AR.

I can only speak for N1MM+ but if you set it and the K3 to have PTT and 
Keying on DTR-RTS, N1MM+ sends Morse on the key line, not KY commands to 
the CAT port.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 5/22/2019 9:19 AM, Don Wilhelm wrote:
> Gregg,
>
> I believe the question is more properly stated as "Does the logging 
> program format the string of ASCII characters as a "KY" command for 
> Elecraft gear?"
>
> I have come to believe that it does not - it just sends ASCII 
> characters in a format acceptable for the WinKeyer.
>
> 73,
> Don W3FPR
>
> On 5/22/2019 12:06 PM, gregg.w6izt1 at gmail.com wrote:
>> If I am not mistaken the logging programs sends ASCI characters to the
>> keyer, which in turn generates morse.
>>
>