[Elecraft] KX3 & MORTTY: How to?

[Jim Rhodes]

To key CW you need to set either the CW KEY1 or CW KEY2 to HAND depending
on if you want to key the tip or ring to send your CW. If you want to use
the PTT function of the MORTTY that would connect to ring 1 on the MIC jack
with ground to ring 2.


On Mon, May 20, 2019 at 9:14 AM Eric Rosenberg <ericrosenberg.dc at gmail.com>
wrote:

> I'd like to use MORTTY with my KX3 (driven by Win4K3 or N1MM), but can't
> figure our how to do it.
>
> It appears that I have to turn the KX3 keyer off, but that doesn't seem
> possible.
>
> I'm using the MORTTY CW sketch and 3-pin connectors (tip=CW;
> ring=PTT;Sleeve=rig ground)
>
> If it isn't possible, is there a way to drive the KX3's internal keyer
> from a keyboard (i.e., laptop).
>
> Any help is appreciated!
>
> 73,
> Eric W3DQ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
Jim K0XU
jim at rhodesend.net