[Elecraft] Problem with K3S F/W update

[Don Wilhelm]

John,

You apparently had some glitch in the computer to K3S communications 
during the process.  Go to the Help file in K3 Utility and look at the 
instructions to "Force a Firmware Download" and follow the steps listed 
there.

Once you get to the actual firmware download, do not interrupt it  The 
K3S will reset several times.  If you get another computer glitch, 
repeat the process.

73,
Don W3FPR

On 5/4/2019 8:15 PM, Jim N7US wrote:
> I just tried to update the F/W in my K3S to 5.67 using the Utility (Rev
> 1.167.25) but it failed.  The TX LED is slowly flashing, the display is off,
> except for MCU LD.
>