[Elecraft] ALC knob control missing on my K3

[Bob McGraw K4TAX]

With the radio in Data A mode, tap MENU, scroll to MIC SEL shown in the 
VFO B area, and then using the VFO knob scroll to Line In. Tap MENU to exit.

The SPEED/MIC knob should have the LED illuminated showing MIC. When you 
turn the knob the VFO B area should show LINE xx where xx is the value 
of Line Gain.    Normally about 35 or so.

73

Bob, K4TAX


On 3/27/2019 5:50 PM, Bob KD7YZ wrote:
> On 3/27/2019 08:02, Richard Ferch wrote:
>
>> There is no ALC knob. Within the K3,
> My bad to paraphrase it that way
>
> "Line"
>
> It was the way I dickered with the apparent ALC "BARS"
>
> Now I can't get a TAP push or shove to say Line"
>
> FT8 Data-A as usual
>
> I am not concerned about the ancillary issue of number of bars as I was
> curious just what Config setting I changed to cause Line to go away
>
>
>
> --
> 73
> Bob KD7YZ
> AMSAT LM #901
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>