[Elecraft] K3/K3s filter setting with the K3 Utility

[Gary Smith]

It seems as intuitive, the filter you use 
is the value you select in the K3 utility 
under filter configuration. I.e. a 1.8 
filter is set at 1.8 in the utility.

Considering there is DSP simultaneously 
occurring at the same time;

Is there any advantage to setting the 1.8 
above, say as 2. in the utility.

Or to have the 200Hz filter engaged at say 
250?

If so, what benefits might be seen by 
doing this?

Thanks,

73,

Gary
KA1J