[Elecraft] Sending AFSK RTTY

[Peter Dougherty]

Hi Rich/all,

Well I managed to find the thing that was really messing me up overall, but
I'm still having massive RTTY issues.

What had been happening was no AFSK tones for RTTY were getting through, and
no voice files for SSB. The key (as I think you mentioned on the N1MM
reflector) was the MENU: MIC+LIN setting on the K3s. Once I set that to ON I
got voice files. But there's literally nothing I can do to get out of LSB
voice mode when WinWarbler is in RTTY mode.

Right now, on the RTTY tab, in the Modulation and Transceiver Mode section I
have AFSK with the LSB button ticked. I've tried both RTTY mode and DATA-L,
which Joe suggested. As I switch WinWarbler between CW, SSB, and RTTY, when
I get to RTTY the radio is placed into LSB (voice) mode, not DATA-A, which
is the desired result. There is no PTT either, the radio just stays in LSB
receive.There is no RTTY SUB MODE setting on the General tab. I guess Dave
removed it after your wrote the wiki; however I changed the DATA-L to RTTY.
No change. 

Since the Elecraft portion of this setup has been solved (Mic+LIN), the rest
is related to DX Labs, so I'm going to take this last bit of setup to their
groups.io forum to conserve bandwidth on this reflector.

 - pjd

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Richard Ferch
Sent: Tuesday, March 19, 2019 10:27 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Sending AFSK RTTY

<http://www.dxlabsuite.com/dxlabwiki/K3PSKRTTY>.

73,
Rich VE3KI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html