[Elecraft] Using Elecraft KPA-1500 for 2 radios

[Bill Johnson]

I use a KR5L switch, but can no longer find on the internet.  Possibly there is a circuit available that you could duplicate.  I use mine to select rigs and a choice of Two amps, I only have one.

73,
Bill
K9YEQ

https://wrj-tech.com/

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Charlie Wirth
Sent: Sunday, March 17, 2019 3:27 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Using Elecraft KPA-1500 for 2 radios

I own a Flex 6400 and an Icom 7700.  I currently have the amplifier connected to the Flex.  There may be times I want to use the Icom 7700.  Other than disconnecting the send and control cables from the 1500 that go to the Flex and plugging in the same cables from the 7700 is there any other way to have both sets of cables connected to the amplifier safely? I would only be using one radio at a time and the other one would be turned off.  I know that I would have to go into the menu settings of the amplifier to change the baud radio and radio when I use the other radio.

Thanks,

Charlie W3DDF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html