[Elecraft] Remote On/Off KPA-1500 - How I do it

[Rich Yost]

 I use a 12v power cube plugged into a Network Power Switch.This is how I turn my 6500 on remotely also.
Its a 4 outlet internet switch, so I use it turn apply 12v to the REMOTE jack and turn on the KPA-1500.
Richn2ry

    On Friday, March 15, 2019, 5:02:12 PM EDT, <elecraft-request at mailman.qth.net> wrote:  
 
 
  6. Remote On/Off KPA-1500 (Charlie Wirth)
 
Message: 6
Date: Fri, 15 Mar 2019 00:57:21 +0000
From: Charlie Wirth <cfwirth at hotmail.com>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Subject: [Elecraft] Remote On/Off KPA-1500
Message-ID:
    <MWHPR0501MB3913C5715C037EB785CBAE09BA440 at MWHPR0501MB3913.namprd05.prod.outlook.com>
    
Content-Type: text/plain; charset="iso-8859-1"

Hello:

 I recently purchased a KPA-1500 amplifier.  I would like to be able to turn on the amplifier remotely.  The manual says to apply 12v to the REM jack.  I was wondering if anyone is doing this and what they are using to apply the 12 volts.

Thanks,

Charlie W3DDF


------------------------------