[Elecraft] KPA-1500 tuner questions

[Peter Dougherty]

Good point. Done!
What I have now is both tuners are ONLY in on the SSB portions of 40/80.
Everywhere else the Palstar is electrically bypassed...but I can't remove it
entirely for reasons stated in my previous posts.

 - pjd

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Paul Baldock
Sent: Wednesday, March 13, 2019 10:46 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KPA-1500 tuner questions

At 03:01 AM 3/13/2019, you wrote:
>The problem you will run into is if the antenna SWR changes above the 
>threshold for both the KPA1500 tuner and HF Auto bothtuners will 
>initiate a retune and the two will be fighting each other.

I suggest you set KPA1500 "ATU HISWR RETUNE" to "OFF". The last thing you
want is for the ATU to start tuning when you don't expect it, such as when
you choose the wrong antenna by mistake.

- Paul


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html