[Elecraft] ALC control of W6PQL amp from my K3

[Bob McGraw K4TAX]

I connect the computer to my K3S with one USB cable.  That's all that's needed as it handles all of the signals and commands.  KISS!    Works great. 

Bob, K4TAX


Sent from my iPhone

> On Mar 10, 2019, at 4:51 PM, Bill Frantz <frantz at pwpconsult.com> wrote:
> 
> I lost the SignaLink as well, but I think a lot of readers of this list use one.
> 
> I currently use the internal "sound card" in my upgraded K3, or a home brew interface based on a $5 sound card from Amazon on my KX3.
> 
> 73 Bill AE6JV
> 
>> On 3/10/19 at 2:40 PM, wes_n7ws at triconet.org (Wes) wrote:
>> 
>> True to a point.  I would (and did) lose the SignaLink.  I use my Lenovo laptop's internal sound card, even with a K3S.
>> 
>> Wes  N7WS
>> 
>>> On 3/10/2019 2:16 PM, Bill Frantz wrote:
>>> What makes Don's excellend advice harder is that there may be as many as 4 audio level controls between the computer and the transmitter. (The one in the program, the OS's control, one on the interface box (SignaLink), and the one on the radio.)
>>> 
>>> My solution is to have all but one, the one in the program, set to constant values, so they can be quickly set.
>>> 
>>> 73 Bill AE6JV
> 
> -------------------------------------------------------------------------
> Bill Frantz        | The first thing you need when  | Periwinkle
> (408)356-8506      | using a perimeter defense is a | 16345 Englewood Ave
> www.pwpconsult.com | perimeter.                     | Los Gatos, CA 95032
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html