[Elecraft] K2: Flaky 160M switching

[Jim KO5V]

OK. One thing common to it all that could be affected by the flexing of the RF board, is the J14
connector assembly. It looks like it could be a bit fragile, since it's so tall. I'll check it again,
and then start tapping.

Thanks again Don. 73,

Jim KO5V


-----Original Message-----
>From: Don Wilhelm <donwilh at embarqmail.com>
>Sent: Mar 2, 2019 3:51 PM
>To: Jim KO5V <ko5v at earthlink.net>, Elecraft List <elecraft at mailman.qth.net>
>Subject: Re: [Elecraft] K2: Flaky 160M switching
>
>Jim,
>
>K1 and the entire 160 meter low pass filter is not in the path for the 
>RX ANT, so changing K1 will not help.
>
>Remove the top cover (you can operate like that) and tap on things 
>gently with a pencil eraser to see if you can locate the problem.
>
>73,
>Don W3FPR