[Elecraft] KX2 RTTY Help

[Don Wilhelm]

John,

Do you have the soundcard properly identified to the MMTTY and 2Tone 
software?

73,
Don W3FPR

On 3/1/2019 5:05 PM, John Reilly wrote:
> Trying to get RTTY running on my KX2, but no luck, so far.
> 
> The KX2 is setup for WSJTx and works properly (TX and RX) with both 
> straight audio cables to the computer and through a SignaLink USB. My 
> conclusion from this is that the audio connections and audio gains must 
> be set relatively close.
> 
> Receive problems:
> I have both MMTTY & 2Tone (via N1MM) setup. In MMTTY, I see no receive 
> trace on the spectrum scope, just a dot in the middle of the XY scope. 
> In 2Tone, I have the familiar two humps, but they are in left sector of 
> the display. Audio gain controls do not seem to effect the display, and 
> I cannot find why the display is displaced.
> 
> Transmit problem:
> Both MMTTY and 2Tone transmit; however I just get the carrier, not the 
> Mark and Shift. This occurs with both the SignaLink and direct audio 
> cables from the computer to the KX2. They both TX, so PTT is working.
>