[Elecraft] Cable for FSK-D

[Nr4c]

No. And a USB cable won’t work. You need an interface that takes the TX from  aerial port to the FSK pin on ACC port. You can use a splitter here. Avail from Elecraft. 

Signal to ACC FSK pin must be T level(need for interface). 

Sent from my iPhone
...nr4c. bill


> On Jun 29, 2019, at 2:28 PM, Kevin, N4TT <kkinderen at gmail.com> wrote:
> 
> I'd like to use FSK-D. I've read over the options and would like to use a
> USB to ACC cable. The ACC socket on the K3s is being used by the KPA/KAT
> combo.
> 
> Is there an off-the-shelf kit of cables/interrupters I can get that would
> be plug-n-play for FSK-D on a K3s + KAT + KPA?
> 
> 73,
> Kev N4TT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com