[Elecraft] Diversity Receive setup??

[donovanf at starpower.net]

Dave, 


Go to CONFIG and check your L-MIX-R settings 


73 
Frank 
W3LPL 

----- Original Message -----

From: "Dave Weiss" <davidhweiss at gmail.com> 
To: elecraft at mailman.qth.net 
Sent: Saturday, June 29, 2019 5:52:43 PM 
Subject: [Elecraft] Diversity Receive setup?? 

Hi All: 

I have a BOG loop setup with 30 Feet per side of 50 OHM RG213 (4 Sided) 
into a 2 to 5 transformer. I have fed this signal into my K3 with KRX3 set 
to ANT=BNC and ANT1 RX PRE indications on the front Panel and DIVERSITY 
RECEIVE as well. I have selected a Broadcast Radio station WOR 710 ( About 
100 Miles from my QTH)* and I hear it clearly in my left ear.* My 
understanding is that with Diversity receive engaged I should hear the sub 
receiver in my right ear; I do not. The AF control for the main receiver 
adjusts audio, the SUB receiver AF control has no effect, and I just hear 
static. I have connected the MAIN antenna to ANT 1 with no difference. 
The selections of the RX ant button change nothing. 

What am I doing wrong? Help would be appreciated.. 

73 

-- 
Dave K3FT 
______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donovanf at starpower.net