[Elecraft] K3s Sensitive adjustment for FT8

[Gary Smith]

Bill & all those who replied,

Thanks. I had tried turning everything to 
around 52 in the windows device but that 
did not resolve the issue. I dropped it to 
1/3 and indeed that resolved the issue. 
I've no idea why things are so different 
than they were but They are what they are.

Thank you!

73,

Gary
KA1J


> Go to the Win10 volume mixer. Turn down the wsjt slider to about 30%
> from the bottom. Now the K3 Lin In control will have the proper
> adjustment sensitivity. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
> > On Jun 15, 2019, at 7:43 PM, Gary Smith <Gary at ka1j.com> wrote:
> > 
> > Something new has come up with the 
> > K3s/JTDX settings and I can't find where 
> > to adjust it to make a change. This is 
> > new, it has been fine till a couple days 
> > ago & maybe the recent win 10 update 
> > nailed me again?
> > 
> > Till now, when setting the levels for Tx 
> > for FT8, I would adjust the setting on the 
> > screen for 4-5 bars with the last one 
> > flickering by adjusting the output with 
> > the speed/Mic knob. The line level would 
> > be somewhere around 5-7 to get this 
> > reading.
> > 
> > Now I have what seems like 
> > hyper-sensitivity, overdrive in that I now 
> > get 5 solid bars with none flickering at 
> > line level 2, I get no bars at line level 
> > 1.
> > 
> > With the K3s set at 20W drive: 
> > 
> > At line level 0 I have no output. 
> > 
> > At line level 1 I have 18W & no bars
> > 
> > At line level 2 I have 5 bars and 18W 
> > output.
> > 
> > There is no adjustment to give me 1, 2, 3 
> > or 4 bars.
> > 
> > I have tried setting the windows sound 
> > settings at different values with no 
> > success, this issue persists.
> > 
> > Any idears?
> > 
> > Thanks, 
> > 
> > Gary
> > KA1J
> > 
> > 
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to nr4c at widomaker.com 
> 
>