[Elecraft] [KX2] WSJT-X & Win10 Volume Mixer

[Don Wilhelm]

Bret,

I am confused by the first and second sentences of your post.
In the first sentence, you say you can achieve 4 bars with the 5th one 
flashing.
Then in the 2nd sentence, you say that you cannot achieve that same 
condition.

Are you aware that if you overdrive the KX2/KX3 audio with too much 
input, the KX2/KX3 will shut down the audio amplifier.  It may be that 
you are driving it with too high an audio level.  Back down on the 
computer generated audio and see if things are restored to normal.

73,
Don W3FPR

On 6/14/2019 9:23 AM, MaverickNH wrote:
> I'll add that, with Win10 volume mixer sliders set at 50%, WSJT-X slider set
> to 50%, MIC GAIN is at 3-4 to get 4 bars with 5th flashing. Running Win10
> volume mixer slider to 100% does not allow 4-5 bars on the KX2 TX even with
> MIC GAIN on 1 and WSJT-X slider near zero.
> 
> BRET/N4SRN
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>