[Elecraft] K3S soundcard after Windows 1809 update

[Andy Moorwood]

I had an issue with audio devices on my work machine after the upgrade. Had to go into control panel and “fix audio problems”

Andy
K3CAQ 

> On Jun 13, 2019, at 6:47 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> I just completed update of this Windows 10 Pro system, 1809 update.   Checked to see if WSJT-X communicated between the computer and radio and find all is well.    No issues, sound card both ways is correct and with my K3S works as it should.  I didn't have to change anything.  Also checked HRD w/DM780, FLDIGI, and MMTTY and all work as expected with no issues.
> 
> Happy camper here.
> 
> 73
> 
> Bob, K4TAX
> 
> 
>> On 6/13/2019 8:38 PM, Jim N7US wrote:
>> Thanks for the suggestions.  I found it hiding in All Settings-->System-->Sound-->Input (or right click on the speaker icon-->Open sound Settings), where I was able to choose my input device and rename it (to Elecraft K3S RX) and pick the icon for a circuit board.  Now it appears in the MMTTY configuration and DXLab's WinWarbler.
>> 
>> Jim N7US
>> 
>> -----Original Message-----
>> 
>> The K3S line out is missing.
>> 
>> 
>> Jim N7US
>> 
>> 
>> From: Ed W0YK
>> 
>> Sent: Thursday, June 13, 4:42 PM
>> 
>> Subject: Re: [Elecraft] K3S soundcard after Windows 1809 update
>> 
>> To: Jim N7US, Elecraft Reflector
>> 
>> It just so happens I was at Elecraft a couple hours ago testing a K3/KIO3B with a Win10 1903 notebook and a Win7 notebook.  Both saw Line In and Line Out on the Codec.
>> 
>> Did Windows possibly disable the Line Out?  Or, is it not even listed?
>> 
>> BTW, is the missing device the K3 LINE OUT  (PC Line In) signal, or the PC Line Out (K3 LINE IN) signal?
>> 
>> 73,
>> Ed W0YK
>> 
>> 
>> -------- Original message --------
>>  From: Jim N7US <jim at n7us.net>
>> 
>> Sent: Thursday, June 13, 2019 14:35
>> 
>> To: Elecraft Reflector (elecraft at mailman.qth.net) <elecraft at mailman.qth.net>
>> 
>> Subject: K3S soundcard after Windows 10 V. 1903 update
>> 
>> After the update to Windows 1809, Windows isn't seeing the line-out CODEC of
>> my K3S.  It recognizes the line-in one just fine.  Any suggestions would be
>> appreciated.  Thanks.
>> 
>> 
>> Jim N7US
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to andy.moorwood at moorcom.com