[Elecraft] Help with IF Noise, DSP Noise, NR settings

[Nr4c]

This is not an easy thing. 

First, are you hearing general band noise, a constant “ shhhhhhhhhhhh” or pulses as in lightning, power line, or ignition type noise. 

For band noise, the NR will be your best solution. Experiment, but don’t go too deep. Deep settings will distort and make it sound like you’re underwater. 

For the pulse noises, try IF first, again don’t use extreme settings. If this doesn’t work, try the DSP settings and see if this will work. 

I have NB set to Med4. NR is set to F1-3.  

YMMV. 

Have fun!

Sent from my iPhone
...nr4c. bill


> On Jun 13, 2019, at 6:51 AM, Ronnie Hull <w5sum at comcast.net> wrote:
> 
> Going from a TenTec Orion to the K3 the only disappointing thing to me was the difficulty in using the NB and NR and DSP. I finally just gave up. If I can hear it I work it. If I don’t I don’t.
> 
> W5SUM 
> 
> Sent from my iPhone
> 
>> On Jun 13, 2019, at 5:04 AM, KC6CNN <kc6cnn at gmail.com> wrote:
>> 
>> Hello Everyone. 
>> I was listening this morning to a few week signals and lots of static. 
>> I was playing with the IF Noise Blanker and DSP Noise Blanker and NR
>> Settings to find what would take out the static but leave the CW tone. 
>> I could not find a good setting. 
>> Is there any information or help in finding a good setting for these. 
>> 
>> Thanks in advance. 
>> Gerald. 
>> 
>> 
>> 
>> 
>> -----
>> KC6CNN - Gerald
>> K3 # 6294
>> KX3 # 757
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w5sum at comcast.net 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com