[Elecraft] Erratic tuning on K2

[Don Wilhelm]

Steve,

It is rare to find a faulty encoder.  Those encoders are the optical 
type and almost never fail.  I have seen only one failure in the time I 
was repairing K2s and I have dealt with over 1000 repairs.

I would first reflow the soldering on the encoder wires and Front panel 
U3 as well as P1, RF Board J7 and Control Board P2.  Also reflow Control 
Board U6 pins 8 and 16.

73,
Don W3FPR

On 6/10/2019 9:09 AM, Steve Kavanagh via Elecraft wrote:
> One of my K2's has developed a problem where it is (somewhat intermittently) unresponsive to turning the tuning knob.  Turning the knob may or may not, at different times, cause the radio to change frequency.  Pushing on the case/panels and tapping the tuning knob sometimes seem to help, so I am suspicious of the board-mating connectors and solder joints for the encoder. This happens regardless of tuning step size or VFO A/B choice and does not affect the RIT.
> 
> A few questions before I tear into it:
>