[Elecraft] KX3 and the Sigmalink USB

[Nr4c]

Yes, but you still must turn OFF bias and BTNS. 

This arrangement works very well. I like to put a spitter in the phones jack with one end to computer the other for ear buds so I can monitor the radio audio. Elecraft still hasn’t added a feature to have phones plus speaker as in the K-Line. 

Sent from my iPhone
...nr4c. bill


> On Jun 9, 2019, at 8:24 AM, Neil Zampella <neilz at techie.com> wrote:
> 
> FWIW... you don't need a signalink to connect the KX3 for digital modes.
> 
> All you need is the KXUSB cable for CAT control (& PTT), and 3.5 cables
> for the MIC and PHONO jackts to the Line out/speakers and line in on the
> computer.
> 
> Very simple, and no having to worry about switching about jumpers or
> adding capacitors.
> 
> Neil, KN3ILZ
> 
>> On 6/8/2019 1:47 PM, Terry Basom wrote:
>> The SLMODKX3 jumper module for using the Signalink USB with a KX3 or KX2,
>> has a DC blocking capacitor built in.
>> 
>> Can anyone tell me where it is in the circuit and a value? It eliminates
>> turning off the mike bias in the menu when using the Signalink USB. I am
>> just using jumpers and would like to put in the capacitor to eliminate
>> having to turn off mike bias and having to remember to turn it back on.
>> 
> 
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com