[Elecraft] K4 standing on Sherwood's RX list
Dave Cole (NK7Z)
dave at nk7z.net
Sat Jun 8 20:05:31 EDT 2019
What a nice piece of work Jim, thank you!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 6/8/19 3:53 PM, Jim Brown wrote:
> On 6/8/2019 3:08 PM, Bob McGraw K4TAX wrote:
>> I do wish he would post transmit IMD numbers. You might surprised at
>> the radios that are clean and the radios that are.......well not so
>> clean.
>
> There are alternative measurements, done by ARRL as part of their lab
> tests, that quantify an even more important performance spec -- CW
> keying bandwidth. Several years ago, after discussions about excessive
> CW bandwidth at a WRTC, N0AX arranged for me to get ARRL's data in
> electronic form. I exported that data to a spreadsheet and plotted data
> for most of the rigs on the same graph. That report is at
> http://k9yc.com/TXNoise.pdf
>
> I've also done some of my own measurements, using my second K3/P3. The
> first set of data is at http://k9yc.com/P3_Spectrum_Measurements.pdf A
> second set of data focuses on the FTDX5000. I measured my neighbor's rig
> before and after he had loaded Yaesu's "fix" for it's very excessive
> bandwidth. It's at http://k9yc.com/FTDX5000_Report.pdf
>
> 73, Jim K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
More information about the Elecraft
mailing list